BUSCHJOST單向閥資料,寶碩價格

單向閥是氣流只能一個方向流動而不能反向流動的方向控制閥。其工作原理與液壓?jiǎn)蜗蜷y一樣。壓縮空氣從P口進入，克服彈簧力和摩擦力使單向閥閥口開啟，壓縮空氣從P流至A;當P口無壓縮空氣時，在彈簧力和A口(腔)余氣力作用下;閥口處于關閉狀 態，使從A至P氣流不通。單向閥應用于不允許氣流反向流動的場合，如空壓機向氣罐充氣 時，在空壓機與氣罐之間設置一單向閥，當空壓機停止工作時，可防止氣罐中的壓縮空氣回流 到空壓機。單向閥還常與節流閥、順序閥等組合成單向節流閥、單向順序閥使用。

The following table shows the characteristics of the components used.
1 Motor frame (possibly for screening)
2 Reference potential for contacts
3 Limit feedback signal (OPEN) contact opened at limit
4 Limit feedback signal (CLOSED) contact opened at limit
5 and 6 Connections for phase 1
7 and 8 Connections for phase 2
Buschjost offers various valve designs and a choice of DC,
synchronous and stepper motors catering for the wide range of
applications of the motorised valve and the customer‘s needs.
The mechanical contacts of DC motors make
them unsuitable for control functions involving a
large number of small adjustments.

下表顯示了所使用的部件的特性。1電機框架(可能用于篩選)2觸點參考電位3限制反饋信號(OPEN)觸點在限制開啟4限制反饋信號(CLOSED)觸點在限制開啟5和6為第17階段和第8階段連接 Buschjost 為第2階段連接提供各種閥門設計和直流、同步和步進電動機的選擇，以滿足機動閥門的廣泛應用和客戶的需求。直流電動機的機械接觸使它們不適合于涉及大量小調整的控制功能。BUSCHJOST單向閥資料,寶碩價格

9615.02400
9650.02400
9657.02400
9636.02450
9638.02400
9624.02400
9651.02400